پروفسور فیزیک

این سایت برای دانش آموزان،دانشجویان،اساتیدفیزیک و علاقه مندان به دانش فیزیک می باشد...

Short-term Floor Protection – A Product Guide

Your floors need particular protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so that you can make knowledgeable decisions on the best product to use for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embody widespread adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to 48 mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and different inflexible protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as 4 toes by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often go away adhesive residue when removed. Frequent paper protection products include:

· A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is cheap however doesn’t afford any impact protection and can easily tear

· Scrim paper might incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they’re additionally too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and could be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of utilizing Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper can also rip simply so it not usually really useful for use

· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection nevertheless it isn’t coated with a water resistant end and ought to be kept dry always so that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping in order that they should not be used on any floors that are curing. Two of the great benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don’t supply any impact protection and are normally rated for brief time period use of 30 to ninety days only. Polyethylene films are designed for one-time use and don’t use recycled supplies making them a poor selection in maintainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films will have a lower tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual dimension of 4 toes by eight feet and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/four inch thick. Plywood is commonly 1/4 inch to three/four inch thick. Both products provide impact protection on a variety of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to hold and store. These wood sheets ought to be used on prime of a softer protection similar to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t supply moisture protection and can be harder to cut to measurement than different protection types.

If you beloved this short article and you would like to receive much more information about temporary carpet protection kindly visit our site.

پروفسورفیزیک © 2016 Frontier Theme